Tolerance Parser

ISO 286-1

30H7 ISO hole tolerance
30g6 ISO shaft tolerance
30+0.1 Tolerance +0.1/0
30+0.1 -0.5 Tolerance +0.1/-0.5
30+-0.3 Tolerance +0.3/-0.3
30f General tolerance fine
30m General tolerance medium
30c General tolerance coarse
Separate tolerances by [space], use operators [+] (default) or [-]

Choose a fit type to see the matching hole and shaft classes.

Basis Hole Shaft Fit Examples
Hole basis H8 d9 Generous clearance Multi-bearing shaft, plain bearing over a wide temperature range, lever bearing
Hole basis H8 e8 Noticeable clearance Multi-bearing shaft, plain bearing over a wide temperature range, lever bearing
Hole basis H8 h9 Easily slidable Sliding coupling, spacer sleeve
Hole basis H8 f7 Small clearance Guide block, crosshead slideway
Hole basis H7 g6 No noticeable clearance Precise plain bearing
Hole basis H7 h6 Only slidable with lubricant Collar, change gear, centering, tailstock quill
Shaft basis H11 h9 Mostly generous clearance Easily slip-fitted parts
Shaft basis D10 h9 Very generous clearance Loose key connection with tension
Shaft basis E9 h9 Generous clearance Push-fit connection, lever bearing
Shaft basis F8 h9 Noticeable clearance Plain bearing
Shaft basis G7 h6 No noticeable clearance Precision linear guide
Shaft basis H9 h9 Just slidable by hand Loose key connection (shaft and hub)
Shaft basis H7 h6 Just slidable by hand Sliding coupling
Basis Hole Shaft Fit Examples
Hole basis H7 js6 Slidable under light pressure Precise centering
Hole basis H7 k6 Assembled without significant force Hand wheel, coupling, belt pulley
Hole basis H7 n6 Assembled under pressure Torque transmission with additional anti-rotation lock
Shaft basis JS9 h9 Slidable under light pressure Light key connection in hub
Shaft basis JS7 h6 Slidable under light pressure Parts often disassembled
Shaft basis K7 h6 Assembled without significant force Hand wheel, coupling, belt pulley
Shaft basis N7 h6 Assembled under pressure Cylindrical pin
Basis Hole Shaft Fit Examples
Hole basis H7 p6 Pressed or shrink-fitted Small torques without additional anti-rotation lock
Hole basis H7 r6 Pressed or shrink-fitted Small torques without additional anti-rotation lock
Hole basis H7 s6 Pressed or shrink-fitted Small torques without additional anti-rotation lock
Shaft basis P9 h9 Possibly needs fitting work Fixed key connection (shaft and hub)
Shaft basis P7 h6 Pressed or shrink-fitted Small torques without additional anti-rotation lock
Shaft basis S7 h6 Shrink-fitted Larger torques